Gutter Example Price Sheet
Generic Contractor Price List – July 2022
(all prices in USD unless noted)
5″ K‑Style Aluminum Gutter Products
- White, Imperial Brown, Black gutter & downspout – $3.85 / ft
- Additional stock colors – $3.95 / ft
- Wedges (for angled fascia) – $1.00 / ft
- Straphanger installation (no fascia board) – $1.75 / ft
- Special‑order colors – $4.15 / ft + pre‑measure charge
6″ K‑Style Aluminum Gutter Products (limited colors)
- White, Royal Brown, Black gutters – $5.80 / ft
- Other available colors – $6.00 / ft
- 3″ × 4″ commercial downspouts – $5.05 / ft
- Wedges (for angled fascia) – $1.35 / ft
- Straphanger installation (no fascia board) – $2.30 / ft
Additional Products & Services
- Remove & haul existing aluminum gutter – $0.40 / ft
- Remove only (leave scrap on‑site) – $0.50 / ft
- Haul away only – $0.35 / ft
- Zip hinges (flip‑up extensions) – $11.00 / set
- Irregular or bay corners – $33.00 / each
- Hand‑cut corners – $44.00 / each
- Expansion joints (5″/6″) – $45.00 / $55.00 each
- 1″ × 6″ primed gutter board (max 40′) – $10.00 / ft
- 1″ × 6″ rough‑sawn gutter board – $12.00 / ft
- Stand‑off charge (overhangs ≥ 2′) – $1.00 / ft
- Brackets to studs (open rafters) – $0.70 / ft
- Deck cut‑through for downspout – $30.00 / each
- Cement drains/crocks – $10.00 / each
- Downspout reconnect or tie‑in – $15.00 / each
- Downspout redirection (return visit) – $45.00 + materials
- Decorative downspout box (5″/6″) – $105.00 / $140.00 each
- Minimum charge (< 70 ft total) – $85.00 service + gutter cost
- Service charge (projects > 2½ stories) – $0.50 / ft + man‑lift cost
- Pre‑measure for special‑order colors (incl. material pickup) – $50.00
Gutter Protection Products
(Clean‑out and re‑secure fees may apply to protection‑only jobs: $75 + $0.50/ft each)
- Aluminum mesh screens (5″/6″) – $4.20 / $4.50 per ft
- Leaf‑Less PRO (5″/6″) – $4.60 / $5.05 per ft
- Leaf‑Less PRO with T‑straps (5″/6″) – $5.95 / $6.85 per ft
- Clean Sweep (5″/6″) – $4.50 / $4.95 per ft
- Leaf Relief Retro‑Fit (5″/6″) – $6.10 / $6.30 per ft
General Notes
- Trip charge: $1.00/mile for jobs 40–70 miles; $2.00/mile for projects ≥ 75 miles (e.g., 100 miles = $200).
- Credit‑card payments incur a 4 % service fee.
- Combination 5″/6″ jobs: additional $70 logistics charge.
- Measurement equivalents: 1 miter = 3 ft; 1 elbow = 2 ft; 1 end cap = 1 ft; 1 outlet = 1 ft; minimum downspout length = 10 ft.
- For gutter protection estimates, use total footage of gutter plus miters.